What daily maintenance is required?

  1. Before Print
    Shake the white ink cartridge upwardly and downwardly gently if machine has white ink. Exist certain ink does non come out from its spout during milk shake the cartridge.
    How to milk shake Ink cartridge
    Wear gloves and put a cloth on its spout part similar as shown in below pictures to prevent from ink spilling out from the spout office. Shake it gently (tilt it similar as beneath pictures) more than 20times, then ink will be mixed. If y'all shake it roughly, the ink pack within cartridge may get damaged so ink may leak out.　Please shake a cartridge slowly if the ink pack remains small amount of ink within, otherwise the ink tin non be mixed well.
  2. End of the 24-hour interval
    -Perform [CLEANING] and [NOZZLE WASH] functions.
    Reference: [Performance manual] -> [CHAPTER ii Bones Operations] -> [Execution of head cleaning]
    [Operation manual] -> [CHAPTER 4 Maintenance] -> [Washing the Nozzle]
    -Perform [WIPER CLEANING] and [CARRIAGE OUT] to clean the Cap.
    Reference: [Operation manual] -> [CHAPTER iv Maintenance] -> [Cleaning of wiper]
  3. Maintenance for white ink (White maintenance)
    This machine has white ink apportionment organisation which prevents from ink precipitation inside the white ink line. If you apply white ink 2cc or more* every day, you do not have to perform the White maintenance function. However, if you practice not apply the automobile every solar day, the White maintenance function has to be operated in one case every two weeks.
    Reference:[Operation manual] -> [Chapter 4 Maintenance] -> [Maintenance for white ink]
    *2cc is equivalent to four times of normal cleaning or fifteen times of 10cm x 10cm solid printing.
  4. When waste ink is full
    Please be sure to dispose the waste ink from the Waste ink tank and the Wiper bottle pursuant to the regulations of your district.
    Reference:[Operation manual] -> [Chapter 4 Maintenance] -> -[When the waste ink is full]
  5. To avert ink dripping during a impress function
    Ink droplets may occur on a bottom of the carriage due to ink mist at the time of press. If the ink droplets are dropped on material, it stains on impress fabric surface, making nozzles out or blurred impress result. Please clean the bottom of the carriage with preferred Washing liquid and Make clean stick.
    Reference: [Operation transmission] -> [Chapter iv Maintenance] -> [Avoiding dripping of ink droplet at printing]
  6. Other
    – Refill Antifreeze mixed water if the machine is shown "H2o LACK" warming message.
    Reference: [Performance manual] -> [CHAPTER four Maintenance] -> [Refilling antifreeze mixed h2o]
    -Cleaning drinking glass of LED UV unit of measurement.
    Reference:[Operation transmission] -> [CHAPTER 4 Maintenance] -> [Avoiding dripping of ink droplet at printing]